Hacking a pc Just with IP
The article will illustrate about the hacking of a remote
computer’s hard disk drive. I will only show how to hack a
remote computer, but it will be only for educational
purposes. Don’t misuse.
As already described, the net bios hacking is an easiest
way to gain access over a remote computer’s
hard disk. If the technique is successful then we can see
as well as edit the data in a remote computer. So,lets
start:
1. Open command prompt by typing “cmd” in the “run bar”
and then hit “enter”. Type without quotes
2. The second point is to obtain an ip address. There are
various ways to find out an ip address. My friends can use
this software. Download the software Click Here.
For How to use software see my post click here
3. After You have selected a live ip, type “net view”
command in c prompt and hit Enter.
4. Wait for some time and in the “cmd” window a message
like this will get displayed viz., “The Command was
completed successfully”.
5. Now You will have to type the remote computer’s ip
address in the following manner:
C:\> net view \\198.162.1.3
and then have to hit enter. Note : in place of 198.162.1.3
You will have to type the remote computer’s ip address. If
you succeed in this step, You will find the Hard disk
drives and printers which will get displayed in the
window.
6. After the successful attempt, use the “net view”
command in the same window. Net view is a bios command by
which we can view the content of the remote computer and
its installed printers. This can be further explained with
the following example:
i) C:\> net use G: \\198.162.1.3\L
ii) C:\> net use H: \\198.162.1.3\My shared docs
Point to be noticed is that if G and H are the network
drive names which we have to create on our computer so as
we can gain access over the remote computer.
Apart from this if your hard disk is divided into 3 drives
say “C”, D and E, The remaining A will belong to Floppy
drive and F as CD-ROM, you will have to give L as your
shared drive in CMD as explained in the above example.
7. If u use the commands and it got successful, your
computer will display in the cmd window like this viz,
“The Command Completed Successfully”. Almost all the work
has been done now.
8. Click on “My Computer” now and on opening this you will
notice new “ Hard disk Drive” which is shared. Now you can
access the victims computer. If the write access is
enabled on victims machine, then you can edit, copy,
paste, steal anything what ever you want.
[If the firewall is enabled on the remote computer, You
will not then be able to gain access through Net Bios as
an error message will be displayed.]
So enjoy it but within limits.
I would like to hear from You how was the article, if u
enjoyed share through comments.