Hacking a pc Just with IP

Hacking a pc Just with IP

The article will illustrate about the hacking of a remote

computer’s hard disk drive. I will only show how to hack a

remote computer, but it will be only for educational

purposes. Don’t misuse.


As already described, the net bios hacking is an easiest

way to gain access over a remote computer’s
hard disk. If the technique is successful then we can see

as well as edit the data in a remote computer. So,lets

start:


1. Open command prompt by typing “cmd” in the “run bar”

and then hit “enter”. Type without quotes


2. The second point is to obtain an ip address. There are

various ways to find out an ip address. My friends can use

this software. Download the software Click Here.
      For How to use software see my post click here


3. After You have selected a live ip, type “net view”

command in c prompt and hit Enter.


4. Wait for some time and in the “cmd” window a message

like this will get displayed viz., “The Command was

completed successfully”.


5. Now You will have to type the remote computer’s ip

address in the following manner:


C:\> net view \\198.162.1.3


and then have to hit enter. Note : in place of 198.162.1.3

You will have to type the remote computer’s ip address. If

you succeed in this step, You will find the Hard disk

drives and printers which will get displayed in the

window.


6. After the successful attempt, use the “net view”

command in the same window. Net view is a bios command by

which we can view the content of the remote computer and

its installed printers. This can be further explained with

the following example:


i) C:\> net use G: \\198.162.1.3\L


ii) C:\> net use H: \\198.162.1.3\My shared docs


Point to be noticed is that if G and H are the network

drive names which we have to create on our computer so as

we can gain access over the remote computer.


Apart from this if your hard disk is divided into 3 drives

say “C”, D and E, The remaining A will belong to Floppy

drive and F as CD-ROM, you will have to give L as your

shared drive in CMD as explained in the above example.


7. If u use the commands and it got successful, your

computer will display in the cmd window like this viz,

“The Command Completed Successfully”. Almost all the work

has been done now.


8. Click on “My Computer” now and on opening this you will

notice new “ Hard disk Drive” which is shared. Now you can

access the victims computer. If the write access is

enabled on victims machine, then you can edit, copy,

paste, steal anything what ever you want.


[If the firewall is enabled on the remote computer, You

will not then be able to gain access through Net Bios as

an error message will be displayed.]


So enjoy it but within limits.


I would like to hear from You how was the article, if u

enjoyed share through comments.